You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
227 lines
6.5 KiB
227 lines
6.5 KiB
#!/bin/bash
|
|
|
|
# INSTALLER SCRIPT FOR ADAFRUIT RGB MATRIX BONNET OR HAT
|
|
|
|
# hzeller/rpi-rgb-led-matrix sees lots of active development!
|
|
# That's cool and all, BUT, to avoid tutorial breakage,
|
|
# we reference a specific commit (update this as needed):
|
|
GITUSER=https://github.com/hzeller
|
|
REPO=rpi-rgb-led-matrix
|
|
COMMIT=814b79b5696d32dd1140304b41a1ec0068bb271a
|
|
|
|
if [ $(id -u) -ne 0 ]; then
|
|
echo "Installer must be run as root."
|
|
echo "Try 'sudo bash $0'"
|
|
exit 1
|
|
fi
|
|
|
|
clear
|
|
|
|
echo "This script installs software for the Adafruit"
|
|
echo "RGB Matrix Bonnet or HAT for Raspberry Pi."
|
|
echo "Steps include:"
|
|
echo "- Update package index files (apt-get update)"
|
|
echo "- Install prerequisite software"
|
|
echo "- Install RGB matrix driver software and examples"
|
|
echo "- Configure boot options"
|
|
echo "Run time ~15 minutes. Some options require reboot."
|
|
echo "EXISTING INSTALLATION, IF ANY, WILL BE OVERWRITTEN."
|
|
echo
|
|
echo -n "CONTINUE? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Canceled."
|
|
exit 0
|
|
fi
|
|
|
|
# FEATURE PROMPTS ----------------------------------------------------------
|
|
# Installation doesn't begin until after all user input is taken.
|
|
|
|
INTERFACE_TYPE=0
|
|
INSTALL_RTC=0
|
|
QUALITY_MOD=0
|
|
|
|
# Given a list of strings representing options, display each option
|
|
# preceded by a number (1 to N), display a prompt, check input until
|
|
# a valid number within the selection range is entered.
|
|
# Can we pass an array?
|
|
selectN() {
|
|
args=("${@}")
|
|
for ((i=0; i<$#; i++)); do
|
|
echo $((i+1)). ${args[$i]}
|
|
done
|
|
echo
|
|
REPLY=""
|
|
while :
|
|
do
|
|
echo -n "SELECT 1-$#: "
|
|
read
|
|
if [[ $REPLY -ge 1 ]] && [[ $REPLY -le $# ]]; then
|
|
return $REPLY
|
|
fi
|
|
done
|
|
}
|
|
|
|
OPTION_NAMES=(NO YES)
|
|
|
|
INTERFACES=( \
|
|
"Adafruit RGB Matrix Bonnet" \
|
|
"Adafruit RGB Matrix HAT + RTC" \
|
|
)
|
|
|
|
QUALITY_OPTS=( \
|
|
"Quality (disables sound, requires soldering)" \
|
|
"Convenience (sound on, no soldering)" \
|
|
)
|
|
|
|
echo
|
|
echo "Select interface board type:"
|
|
selectN "${INTERFACES[@]}"
|
|
INTERFACE_TYPE=$?
|
|
|
|
if [ $INTERFACE_TYPE -eq 2 ]; then
|
|
# For matrix HAT, ask about RTC install
|
|
echo
|
|
echo -n "Install realtime clock support? [y/N] "
|
|
read
|
|
if [[ "$REPLY" =~ (yes|y|Y)$ ]]; then
|
|
INSTALL_RTC=1
|
|
fi
|
|
fi
|
|
|
|
echo
|
|
echo "Now you must choose between QUALITY and CONVENIENCE."
|
|
echo
|
|
echo "QUALITY: best output from the LED matrix requires"
|
|
echo "commandeering hardware normally used for sound, plus"
|
|
echo "some soldering. If you choose this option, there will"
|
|
echo "be NO sound from the audio jack or HDMI (USB audio"
|
|
echo "adapters will work and sound best anyway), AND you"
|
|
echo "must SOLDER a wire between GPIO4 and GPIO18 on the"
|
|
echo "Bonnet or HAT board."
|
|
echo
|
|
echo "CONVENIENCE: sound works normally, no extra soldering."
|
|
echo "Images on the LED matrix are not quite as steady, but"
|
|
echo "maybe OK for most uses. If eager to get started, use"
|
|
echo "'CONVENIENCE' for now, you can make the change and"
|
|
echo "reinstall using this script later!"
|
|
echo
|
|
echo "What is thy bidding?"
|
|
selectN "${QUALITY_OPTS[@]}"
|
|
QUALITY_MOD=$?
|
|
|
|
# VERIFY SELECTIONS BEFORE CONTINUING --------------------------------------
|
|
|
|
echo
|
|
echo "Interface board type: ${INTERFACES[$INTERFACE_TYPE-1]}"
|
|
if [ $INTERFACE_TYPE -eq 2 ]; then
|
|
echo "Install RTC support: ${OPTION_NAMES[$INSTALL_RTC]}"
|
|
fi
|
|
echo "Optimize: ${QUALITY_OPTS[$QUALITY_MOD-1]}"
|
|
if [ $QUALITY_MOD -eq 1 ]; then
|
|
echo "Reminder: you must SOLDER a wire between GPIO4"
|
|
echo "and GPIO18, and internal sound is DISABLED!"
|
|
fi
|
|
echo
|
|
echo -n "CONTINUE? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Canceled."
|
|
exit 0
|
|
fi
|
|
|
|
# START INSTALL ------------------------------------------------------------
|
|
# All selections are validated at this point...
|
|
|
|
# Given a filename, a regex pattern to match and a replacement string,
|
|
# perform replacement if found, else append replacement to end of file.
|
|
# (# $1 = filename, $2 = pattern to match, $3 = replacement)
|
|
reconfig() {
|
|
grep $2 $1 >/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
# Pattern found; replace in file
|
|
sed -i "s/$2/$3/g" $1 >/dev/null
|
|
else
|
|
# Not found; append (silently)
|
|
echo $3 | sudo tee -a $1 >/dev/null
|
|
fi
|
|
}
|
|
|
|
echo
|
|
echo "Starting installation..."
|
|
echo "Updating package index files..."
|
|
apt-get update
|
|
|
|
echo "Downloading prerequisites..."
|
|
apt-get install -y --force-yes python2.7-dev python-pillow python3-dev python3-pillow
|
|
|
|
echo "Downloading RGB matrix software..."
|
|
curl -L $GITUSER/$REPO/archive/$COMMIT.zip -o $REPO-$COMMIT.zip
|
|
unzip -q $REPO-$COMMIT.zip
|
|
rm $REPO-$COMMIT.zip
|
|
mv $REPO-$COMMIT rpi-rgb-led-matrix
|
|
echo "Building RGB matrix software..."
|
|
cd rpi-rgb-led-matrix
|
|
if [ $QUALITY_MOD -eq 1 ]; then
|
|
# Build then install for Python 2.7...
|
|
make build-python HARDWARE_DESC=adafruit-hat-pwm
|
|
make install-python HARDWARE_DESC=adafruit-hat-pwm
|
|
# Do over for Python 3...
|
|
make clean
|
|
make build-python HARDWARE_DESC=adafruit-hat-pwm PYTHON=$(which python3)
|
|
make install-python HARDWARE_DESC=adafruit-hat-pwm PYTHON=$(which python3)
|
|
else
|
|
# Build then install for Python 2.7...
|
|
make build-python HARDWARE_DESC=adafruit-hat USER_DEFINES="-DDISABLE_HARDWARE_PULSES"
|
|
make install-python HARDWARE_DESC=adafruit-hat USER_DEFINES="-DDISABLE_HARDWARE_PULSES"
|
|
# Do over for Python 3...
|
|
make clean
|
|
make build-python HARDWARE_DESC=adafruit-hat USER_DEFINES="-DDISABLE_HARDWARE_PULSES" PYTHON=$(which python3)
|
|
make install-python HARDWARE_DESC=adafruit-hat USER_DEFINES="-DDISABLE_HARDWARE_PULSES" PYTHON=$(which python3)
|
|
fi
|
|
# Change ownership to user calling sudo
|
|
chown -R $SUDO_USER:$(id -g $SUDO_USER) `pwd`
|
|
|
|
|
|
# CONFIG -------------------------------------------------------------------
|
|
|
|
echo "Configuring system..."
|
|
|
|
if [ $INSTALL_RTC -ne 0 ]; then
|
|
# Enable I2C for RTC
|
|
raspi-config nonint do_i2c 0
|
|
# Do additional RTC setup for DS1307
|
|
reconfig /boot/config.txt "^.*dtoverlay=i2c-rtc.*$" "dtoverlay=i2c-rtc,ds1307"
|
|
apt-get -y remove fake-hwclock
|
|
update-rc.d -f fake-hwclock remove
|
|
sudo sed --in-place '/if \[ -e \/run\/systemd\/system \] ; then/,+2 s/^#*/#/' /lib/udev/hwclock-set
|
|
|
|
fi
|
|
|
|
if [ $QUALITY_MOD -eq 1 ]; then
|
|
# Disable sound ('easy way' -- kernel module not blacklisted)
|
|
reconfig /boot/config.txt "^.*dtparam=audio.*$" "dtparam=audio=off"
|
|
else
|
|
# Enable sound (ditto)
|
|
reconfig /boot/config.txt "^.*dtparam=audio.*$" "dtparam=audio=on"
|
|
fi
|
|
|
|
# PROMPT FOR REBOOT --------------------------------------------------------
|
|
|
|
echo "Done."
|
|
echo
|
|
echo "Settings take effect on next boot."
|
|
if [ $INSTALL_RTC -ne 0 ]; then
|
|
echo "RTC will be enabled then but time must be set"
|
|
echo "up using the 'date' and 'hwclock' commands."
|
|
fi
|
|
echo
|
|
echo -n "REBOOT NOW? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Exiting without reboot."
|
|
exit 0
|
|
fi
|
|
echo "Reboot started..."
|
|
reboot
|
|
exit 0
|